ҳ̸Ҳ̸ҳ Rabiza Ekel ҳ̸Ҳ̸ҳ
:
3.147.78.131
:
47.103.87.29 / bstest.wagas.com.cn
:
Linux Wagas-WebServer 3.10.0-1160.11.1.el7.x86_64 #1 SMP Fri Dec 18 16:34:56 UTC 2020 x86_64
:
/
usr
/
include
/
linux
/
Upload File:
files >> /usr/include/linux/ipmi_msgdefs.h
/* * ipmi_smi.h * * MontaVista IPMI system management interface * * Author: MontaVista Software, Inc. * Corey Minyard <minyard@mvista.com> * source@mvista.com * * Copyright 2002 MontaVista Software Inc. * */ #ifndef __LINUX_IPMI_MSGDEFS_H #define __LINUX_IPMI_MSGDEFS_H /* Various definitions for IPMI messages used by almost everything in the IPMI stack. */ /* NetFNs and commands used inside the IPMI stack. */ #define IPMI_NETFN_SENSOR_EVENT_REQUEST 0x04 #define IPMI_NETFN_SENSOR_EVENT_RESPONSE 0x05 #define IPMI_GET_EVENT_RECEIVER_CMD 0x01 #define IPMI_NETFN_APP_REQUEST 0x06 #define IPMI_NETFN_APP_RESPONSE 0x07 #define IPMI_GET_DEVICE_ID_CMD 0x01 #define IPMI_COLD_RESET_CMD 0x02 #define IPMI_WARM_RESET_CMD 0x03 #define IPMI_CLEAR_MSG_FLAGS_CMD 0x30 #define IPMI_GET_DEVICE_GUID_CMD 0x08 #define IPMI_GET_MSG_FLAGS_CMD 0x31 #define IPMI_SEND_MSG_CMD 0x34 #define IPMI_GET_MSG_CMD 0x33 #define IPMI_SET_BMC_GLOBAL_ENABLES_CMD 0x2e #define IPMI_GET_BMC_GLOBAL_ENABLES_CMD 0x2f #define IPMI_READ_EVENT_MSG_BUFFER_CMD 0x35 #define IPMI_GET_CHANNEL_INFO_CMD 0x42 /* Bit for BMC global enables. */ #define IPMI_BMC_RCV_MSG_INTR 0x01 #define IPMI_BMC_EVT_MSG_INTR 0x02 #define IPMI_BMC_EVT_MSG_BUFF 0x04 #define IPMI_BMC_SYS_LOG 0x08 #define IPMI_NETFN_STORAGE_REQUEST 0x0a #define IPMI_NETFN_STORAGE_RESPONSE 0x0b #define IPMI_ADD_SEL_ENTRY_CMD 0x44 #define IPMI_NETFN_FIRMWARE_REQUEST 0x08 #define IPMI_NETFN_FIRMWARE_RESPONSE 0x09 /* The default slave address */ #define IPMI_BMC_SLAVE_ADDR 0x20 /* The BT interface on high-end HP systems supports up to 255 bytes in * one transfer. Its "virtual" BMC supports some commands that are longer * than 128 bytes. Use the full 256, plus NetFn/LUN, Cmd, cCode, plus * some overhead; it's not worth the effort to dynamically size this based * on the results of the "Get BT Capabilities" command. */ #define IPMI_MAX_MSG_LENGTH 272 /* multiple of 16 */ #define IPMI_CC_NO_ERROR 0x00 #define IPMI_NODE_BUSY_ERR 0xc0 #define IPMI_INVALID_COMMAND_ERR 0xc1 #define IPMI_TIMEOUT_ERR 0xc3 #define IPMI_ERR_MSG_TRUNCATED 0xc6 #define IPMI_REQ_LEN_INVALID_ERR 0xc7 #define IPMI_REQ_LEN_EXCEEDED_ERR 0xc8 #define IPMI_NOT_IN_MY_STATE_ERR 0xd5 /* IPMI 2.0 */ #define IPMI_LOST_ARBITRATION_ERR 0x81 #define IPMI_BUS_ERR 0x82 #define IPMI_NAK_ON_WRITE_ERR 0x83 #define IPMI_ERR_UNSPECIFIED 0xff #define IPMI_CHANNEL_PROTOCOL_IPMB 1 #define IPMI_CHANNEL_PROTOCOL_ICMB 2 #define IPMI_CHANNEL_PROTOCOL_SMBUS 4 #define IPMI_CHANNEL_PROTOCOL_KCS 5 #define IPMI_CHANNEL_PROTOCOL_SMIC 6 #define IPMI_CHANNEL_PROTOCOL_BT10 7 #define IPMI_CHANNEL_PROTOCOL_BT15 8 #define IPMI_CHANNEL_PROTOCOL_TMODE 9 #define IPMI_CHANNEL_MEDIUM_IPMB 1 #define IPMI_CHANNEL_MEDIUM_ICMB10 2 #define IPMI_CHANNEL_MEDIUM_ICMB09 3 #define IPMI_CHANNEL_MEDIUM_8023LAN 4 #define IPMI_CHANNEL_MEDIUM_ASYNC 5 #define IPMI_CHANNEL_MEDIUM_OTHER_LAN 6 #define IPMI_CHANNEL_MEDIUM_PCI_SMBUS 7 #define IPMI_CHANNEL_MEDIUM_SMBUS1 8 #define IPMI_CHANNEL_MEDIUM_SMBUS2 9 #define IPMI_CHANNEL_MEDIUM_USB1 10 #define IPMI_CHANNEL_MEDIUM_USB2 11 #define IPMI_CHANNEL_MEDIUM_SYSINTF 12 #define IPMI_CHANNEL_MEDIUM_OEM_MIN 0x60 #define IPMI_CHANNEL_MEDIUM_OEM_MAX 0x7f #endif /* __LINUX_IPMI_MSGDEFS_H */
ҳ̸Ҳ̸ҳ Rabiza Ekel ҳ̸Ҳ̸ҳ